-10%
Product Description
Woodgard Exterior Timbapreservative is a penetrating wood dressing for the protection of all exterior wooden surfaces only
Application Description
Brush or conventional spray.
Health & Safety
Ensure that surfaces are sound and free from dust, dirt, grease and oil. Surfaces must be thoroughly dry – no more than 12% moisture content. Do not apply during cold (below 10°C) or wet weather. Do not apply directly to bare metal surfaces – stop nail holes with wood filler. Do not apply to wet or damp timber. Do not attempt to apply so thickly as to form a film – this may blister, blanch or peel off. It is important to treat the end grain of timber to prevent moisture ingress. It is important to adhere strictly to Application Methods, and to allow adequate drying between coats. N.B. WOODGARD TIMBAPRESERVATIVE is not recommended for floors or decking.
Hazard information can vary based on the colour of a product. Please choose a colour to see the relevant health and safety guidelines for this product.
Download Adobe Reader
- Woodgard Exterior Timbapreservative Technical Datasheet.pdf
Tips & Advice
-
1. Preparing the SurfacesSuitable for application to exterior windows, doors, barge boards, etc.
-
For clean up use Dulux Pre-Paint Brush Cleaner Degreaser or Mineral Turpentine
Key information -
FinishLow Sheen
-
CoverageApprox 10 m² per litre per coat
-
Drying Time4 hours
-
Coats3
Product Features -
Flexible layer-crack,& peeling resistant
-
Enriched with oils that seep into the wood
-
Flows easily for a uniform finish
-